Kärcher RLM 4, Operating Instructions Manual

Page: 55 / 444

457462_b 55 GB
Manually specifying entry points (01)
The first entry point (01/X0) is preset and is 1 m
to right of the charging station. Up to 3 other en-
try points (X1 to X3) can be programmed behind
this point. When specifying the entry points, heed
the following:
■
Do not set entry points too far from the
charging station or too close to one anoth-
er (02/f).
■
Only use as many entry points as necessary.
1. or
* Entry Point
2. or * Point X1 at [020m]
Select one digit in sequence with or
and always accept with .
3. or
* Point X2 at [075m]
Select one digit in sequence with or
and always accept with .
4. If necessary, specify further entry points.
5. Return to the main menu with .
7.5.3 Setting the mowing times
NOTE
There must be at least 30 min. between
programming the mowing times and the
mowing start. If not, the appliance only
starts at the next programmed mowing
time.
In the Weekly Program menu item, the days of
the week and time periods when the appliance
should mow are set. Adapt these settings to the
size of your garden if necessary. If unmown ar-
eas are still visible after approx. one week, in-
crease the mowing periods.
1. or * Weekly Program
■
or * All Days [X] : The appli-
ance mows every day at the set times. If
All Days [ ]
is shown, the appliance
only mows on the set days of the week.
■
or
* Monday [X]
...
* Sunday
[X] : The appliance mows for the set
time periods on the set day of the week.
If
Monday [ ]
is shown, for example,
the appliance does not mow on the re-
spective day.
■
or
Change
: Activate
[X]
or
deactivate
[ ]
the respective day and
set the time periods, type of mowing and
the entry points.
2. Make the settings for every day or the re-
spective day:
■
e.g.
*[M] 07:00-10:00 [?]
: Normal
mowing
[M]
from 7 am – 10 am with au-
tomatically changing entry point 0 – 3
[?] .
■
e.g. *[R] 16:00-18:00 [1] : The ap-
pliance starts with edge mowing
[R]
at 4
pm and moves along the entire boundary
cable. The area mowing then begins at
entry point 1
[1]
. At 6 pm or as soon as
the rechargeable battery is discharged,
the appliance moves back to the
charging station.
■
or
Change
: Change the se-
lected setting.
■
or
Continue
: Confirm the
changes setting and continue to the next
setting.
3. or
Save
: Save all changed set-
tings of the menu item.
7.6 Edge mowing with a manual start
For a manual start, the setting can be made here
that the appliance begins with edge mowing.
Carrying out the edge mowing at the pro-
grammed mowing time periods: see
chapter 7.5.3
"Setting the mowing times", page 55 .
1. or
* Margin mowing
2. or * at manual start
7.7 Setting the secondary area mowing
1. or
* Sub zone mowing
2. Setting the mowing time periods:
■
or
inactive
:
Secondary area mowing is switched off.
■
or active :
The appliance mows until the recharge-
able battery is flat.
■
or
Mowing time in min
:
The appliance mows the secondary area
for the set time period. The following
mowing time periods can be set:
15/30/until rechargeable battery flat.