Kärcher RCW 5, Manual

Page: 19 / 292

English 19
10
Cleaning robot
11
Securing straps
12
Loop
13
Eye
14
Retractor
15
Lever
16
Suction cup
17
Safety line
18
Snap hooks
19
Safety system
20
Charger
21
Charging plug
22
Detergent RM 506
23
Package of microfibre cleaning cloths
24
Reservoir cover
25
Tank with filter inlay
26
Storage space accessories
27
Cleaning robot mount
28
Battery terminal station
29
Valve contact station
30
Valve station
31
Charging socket
32
Cleaning device
33
Microfibre cleaning cloth
34
Intake cleaning cloth
35
Squeegee blade drive wheel
36
Drive wheel
37
Protection filter
38
Bar cover
39
Suction cup
40
Main seal
41
Cleaning brush
42
Collision and edge sensor
43
Valve cleaning robot
44
Battery terminal cleaning robot
45
Valve contact cleaning robot
* Bluetooth
®
wireless technology
Function and operation
The device consists of three units: the battery-powered
cleaning robot, the station and the safety system.
KÄRCHER microfibre cleaning cloths and the KÄRCH-
ER cleaning agent RM 506 are also required for opera-
tion.
Cleaning robot
The cleaning robot is intended for cleaning vertical,
framed glass surfaces. The cleaning is performed by a
cleaning brush and a microfibre cleaning cloth, which is
continuously moistened with detergent.
The cleaning robot adheres to the glass surface to be
cleaned via a self-generated vacuum and moves it
down automatically. With the KÄRCHER
Home & Garden app, the user can control the device if
necessary or have heavily soiled areas run over several
times..
The cleaning robot obtains its energy from a built-in bat-
tery. With one battery charge, the device can clean
glass surfaces up to 50 min long or 20 m² .
Station
In the station, the battery of the cleaning robot is
charged and its tank filled with detergent.
The charging and filling process is automatically activat-
ed by inserting the cleaning robot into the station.
The cleaning robot and the accessories (safety system,
cleaning cloths, charger) can be stored in the station
when not in use.
Safety system
The properly installed safety system can prevent the
cleaning robot from falling unbraked in the event of a
malfunction or accident.
The safety system consists of a retractor with safety line
and snap hook and a suction cup for attachment to
smooth surfaces. The retractor must be additionally se-
cured with a safety strap.
Cleaning programs
Four washing programs are available:
1 Full cleaning
The cleaning robot cleans the entire glass surface
and then the entire edge area once.
2 Partial cleaning
The cleaning robot cleans only the lower, more fre-
quently soiled part of the glass surface, e.g. on bal-
cony or patio doors.
3 Intensive cleaning
(Can be activated via the KÄRCHER
Home & Garden app) Full or partial cleaning is car-
ried out twice.
4 Manual cleaning
(Can be activated via the KÄRCHER
Home & Garden app) The path of travel of the
cleaning robot can be selected for example, to clean
particularly soiled areas individually or repeatedly.
Initial startup
Setting up station
1. Set up the station in a horizontal, level position.
Illustration B
ATTENTION
The location must not be near a heat source (radiator,
room fireplace, etc.) and must not be exposed to direct
sunlight. Otherwise the effectiveness of the detergent
will be reduced.
Filling the station
1. Unscrew the detergent compartment lock.
Illustration C
2. Open the tank cap and pour the cleaning agent into
the station's tank, observing the MIN and MAX
markings.