Kärcher NT 611 ECO M A, Operating Instructions Manual

Page: 14 / 143

English NT 611 Eco M 14
AUTOMATIC MODE
¾
Plug the electric tool's power plug
into the vacuum cleaner (3)
¾
Switch the unit on (1)
¾
The lamp is lit - the vacuum
cleaner is in the standby mode (2)
Note:
♦
The vacuum cleaner is
automatically switched on and off
with the electric tool.
♦
The vacuuming device has a start-
up delay of up to 0.5 s and a
maximum running down time of up
to 15 s.
♦
Electrical tools of 100 - 2200 W
can be connected to the unit. See
the Technical Data page for the
electric tool's power connection
data.
¾
Adapt the connection sleeve to the
electric tool's terminal connection.
¾
Remove the pipe bend from the
suction hose
¾
Mount the connection sleeve to
the suction hose
¾
Connect the connection sleeve to
the electric tool
♦
The minimum volume flow is
adjusted using the rotary
switch (1).
♦
The vacuum hose cross-section
size is indicated at the scales (2).
♦
These differently sized hose
cross-sections are required to
enable adaptation to the
connection cross-sections of the
tools.
Note:
♦
If the vacuum cleaner is operated
at different locations (i.e. a tool is
plugged into the suction point), the
integrated monitoring device must
be adjusted to the connected
(dust-producing) tool. That is to
say, the user must be warned if
the minimum volume flow required
for vacuuming falls below 20 m/s.
♦
The specified minimum volume
flow in relation to the vacuum is
given on the name plate.