Kärcher MC 250, Manual

Page: 66 / 298

66 English
10.4 Maintenance intervals
Note
To preserve eligibility for warranty claims, all servicing and
maintenance work during the warranty period has to be
performed by an authorised Customer Service (ICL), in ac-
cordance with the inspection check list.
● Lubricate all bearings after washing the vehicle.
● The intervals for testing and maintenance (daily / week-
ly) by the customer / operator are listed in the chapter
"Vehicle maintenance plan".
● Have the safety checks according to the applicable local
regulations performed by the Customer Service depart-
ment as necessary.
Further maintenance work must be carried out by the
authorized Customer Service according to the inspec-
tion checklist. Please inform the Customer Service de-
partment in time.
10.5 Vehicle maintenance plan
To be performed by the operator / customer.
10.6 Vehicle lubrication plan
Assembly Activity Daily Wee
kly
Water cooler Clean radiator fins X
Oil cooler Clean radiator fins X
Coolant ex-
pansion reser-
voir Check the coolant level X
Check the wa-
ter/antifreeze
mixing ratio Check seasonally or when
changing the coolant
V-belt Check for tension and wear
and tear X
Hydraulic oil
tank Check the hydraulic oil level
(shown on display) X
Hydraulic cou-
plings and con-
nections Check for leaks X
Hydraulic hos-
es Check for leakage and dam-
age
Note
Exchange the hydraulic hos-
es according to the inspection
checklist!
X
Battery poles Check the battery poles for
oxidation, brush off if neces-
sary, and lubricate with termi-
nal grease. Make sure the
connection cables are firmly
in place.
X
Check the en-
gine oil level Check X
Brake fluid lev-
el Check X
Cab dust filter Check X
Tyres Check the condition and fill-
ing pressure X
Wiping water
container Check the filling level X
Battery Check X
Exhaust sys-
tem Visual inspection X
Lights Check for correction function X
Engine air filter Check / clean or replace air
filter.
X
Radiator grille Cleaning X
Air-conditioner Check and clean the radiator
fins
X
Parking brake Check for correct function X
Pedals Check for correct function X
Steering Check for correct function X
Warning stick-
er Check the legibility, replace if
necessary X
Dust caps and
covers for hy-
draulics Check, replace if necessary X
Screw connec-
tions Check for tightness, tighten if
necessary X
Hoses and ca-
ble clamps Check X
Coolant hoses Check X
Fuel lines and
connections Check for leaks X
Bowden ca-
bles and mov-
ing parts Check for freedom of move-
ment X
Electrical ca-
bles Check for damage X
Bearings / lu-
brication points Lubrication, see chapter "Ve-
hicle lubrication plan" X
Lubrication point Quantity Interval
Fresh water tank hinge,
above 1 Weekly
Fresh water tank hinge, be-
low 1 Weekly
Assembly Activity Daily Wee
kly