8.917-208.0 • HOT • Rev. 05/17
9
PRESSURE W
ASHER
OPERA
TOR’S MANU
AL
89172080-12
OPERATION INSTRUCTIONS
STEP 1: STOP! Read opera-
tor’s manual before operating this
machine. Failure to read operation
and warning instructions may re-
sult in personal injury or property
damage. Connect water supply
hose to inlet connector and turn
water on.
STEP 3: Before installing nozzle,
turn on water supply and run
machine, allowing water to flush
through the system until clear.
Turn pump switch ON or turn knob
to pump position. When a steady
stream of water flows from the
spray gun and wand, the machine
is ready for the nozzle to be in-
stalled. Turn the variable pressure
control handle clockwise to raise
the pressure. For hot water wash-
ing, turn the burner switch ON or
turn knob to the burner position.
(The burner will light automati-
cally.)
STEP 2: On machines with vari-
able pressure wands, grip spray
gun securely. Then turn the vari-
able pressure control handle coun-
terclockwise to reduce pressure.
89172080-13
Selection of high or low pressure is accompanied by
turning the handle.
Note: High pressure nozzle must
be inserted at end of wand to obtain high pressure.
To apply soap, read detergent instructions.
Variable Pressure
Control Handle
Trigger
Variable Pressure
Wand (VP)
High
Pressure
Nozzle
Brass Soap Nozzle
89172080-10
89172080-11
Pump/Burner
Knob
Burner
Switch
Pump
Switch
Attach the high pressure hose to
the spray gun using teflon tape on
hose threads. Attach nozzle exten-
sion to spray gun/wand. Tighten
both by hand.
Before installing nozzle, turn on
water supply and run machine
allowing water to flush through the
system until clear.
Nozzle Extension
Spray
Gun/Wand
Wand
Coupler
Pressure or Soap
Nozzle
Pull spring-loaded collar of the
wand coupler back to insert your
choice of pressure nozzle or soap
nozzle. Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make
sure it is seated properly.
Pressure or Soap
Nozzle
Wand
Coupler
Coupler
Collar
INSULATED STRAIGHT WAND ASSEMBLY
Summary of Contents for Landa HOT 2-1100
Page 2: ......
Page 20: ...Form 8 917 208 0 Revised 05 17 Printed in U S A ...