![background image](http://html1.mh-extra.com/html/ardo/wde-1207x/wde-1207x_quick-start-manual_2966269001.webp)
SM1505
MAIN FUNCTIONS OF THE WASHING MACHINE
USING THE APPLIANCE
▼
WASHING MACHINE OPERATION
(follow these instructions and the washing machine will run the selected wash cycle)
Load the washing machine, add the detergent and softener (see "Detergent drawer") using
the manufacturer's recommended doses reported on the packet. Check that the machine
is plugged into the mains socket, that the door is closed, the water feed valve is open and
that the ON/OFF button is pressed.
Rotate the programmer knob to select the required program and temperature according to
the type of fabric to wash (see program table).
Rotate the timer knob to set the required drying time.
When setting the drying time, the "drying" led will stay lit until the "Start" button is pressed,
at which time it switches off and the machine starts the wash cycle.
The figure alongside shows the main functions of a wash cycle:
WASH, RINSES, SPIN, END.
During the cycle, each of these functions is highlighted by a led informing the user what
the washing machine is doing at that moment. After the spin phase, the corresponding led
will stay lit for approximately 2 minutes; this is the time lapse necessary before the door
can be opened. At this point the "END" led will light up.
The DRY function led lights up while the drying time is being set and flashes during the final
ten minutes (cooling) of the drying phase..
1.
Pre-wash detergent com-partment
2.
Wash detergent compartment
3.
Softener and other additives
N.B. When using a liquid detergent
(recommended for programs without pre-wash), use the special
container (if provided) and follow the manufacturer's instructions.
Remember to remove the liquid detergent container when
using soap powder.
GB
A Programme table
C Optional function buttons
G On/Off button
H
Timer knob
L Start button
P Programme and temperature knob
S Programme status led
MODELLO: WDE 1207X
DESCRIPTION OF THE FUNCTION BUTTONS
▼
START BUTTON:
After selecting the required programme, press this button to start the wash cycle Button (L) will light
up to indicate the wash cycle has started.
5
I
O
End
Risciacqui
supplementari
Prelavaggio
Start
Prelavaggio/
Lavaggio
Risciacqui
Centrifuga
Fine
90
75
60
40
30
60
50
40
30
40
30
40
30
Stop
40
SINTETICI
DELICATI
COTONE
°
C
Risciacqui
Scarico e
centrifuga
Asciugatura
Lavaggio
rapido
LANA
Asciugatura
0'
150'
130'
120'
110'
100'
90'
80'
70'
60'
40'
25'
S
C
P
A
G
H
L
▼
PREWASH:
Press this button and the machine will perform a prewash at the maximum temperature of 40
°
C.
This function can only be used on the “COTTON” and “SYNTHETICS” programmes.
N.B. When this option is used, the detergent must also be added to the appropriate prewash
compartment..
0'
150'
130'
120'
110'
100'
90'
80'
70'
60'
40'
25'
End
Prelavaggio/
Lavaggio
Risciacqui
Centrifuga
Fine
Asciugatura
1
2
3