8.917-208.0 • HOT • Rev. 05/17
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
8
ASSEMBLY INSTRUCTIONS
STEP 1: Connect the power cord
into the proper electrical out-
let, then push in the GFCI reset
button. (Refer to serial plate for
information.)
STEP 2: Connect high pressure
hose to discharge nipple by slid-
ing quick coupler collar back. (If
detergent is to be applied, insert
a detergent injector.) Insert quick
coupler onto discharge nipple and
secure by pushing quick coupler
collar forward.
STEP 3: Attach the high pres-
sure hose to the spray gun using
teflon tape on hose threads. Move
safety latch into locked position.
STEP 6: Check oil level by using
supplied dip-stick. Use SAE 30W
non-detergent only.
STEP 7: Fill fuel tank with proper
fuel.
89172080-9
STEP 5: Release the coupler
collar and push the nozzle until
the collar clicks. Pull the nozzle to
make sure it is seated properly.
89172080-3
89172080-4
Detergent
Injector
STEP 4: Pull the spring-loaded
collar of the wand coupler col-
lar back to insert your choice of
pressure nozzle.
Caution: Never
replace nozzles without engag-
ing the safety latch on the spray
gun trigger.
89172080-5
89172080-6
89172080-7
89172080-8
High
Pressure
Hose
Spray
Gun
High
Pressure Hose
Discharge
Nipple
Pressure
Nozzle
Dipstick
Pressure
Nozzle
Wand Coupler
Collar
Fuel
Cap
Dipstick
Coupler
Collar
Summary of Contents for Landa HOT 2-1100
Page 2: ......
Page 20: ...Form 8 917 208 0 Revised 05 17 Printed in U S A ...