Kärcher HKS 100, Original Instructions Manual

Page: 26 / 136

-
11
The nozzle size is marked on the key sur-
face of the nozzle. o = possible
x = installed as part of the series
1 Frame
 Screw cleaning head to the hose or the
frame (frames: see accessories).
The speed of the interior cleaner depends
on:
– Spray pressure
– Temperature
– Regulator fluid
Note: A change of the regulator screw by
30 to 60° is usually enough to adjust the
speed. With high speed small or lightly
soiled containers are cleaned, low speed is
used to clean large and heavily soiled con-
tainers.
Note: In cold operation a speed of 15-25 1/
min is recommended.
A Regulator screw
 Increasing the speed: Turn the regula-
tor screw in an anticlockwise direction.
 Reducing speed: Turn the regulator
screw in a clockwise direction.
Adjusting the height of the cover:
 Release fastening toggle.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
Adjusting the height of the cover:
 Loosen the fastening toggle for height
adjustment.
 Slide the cover on the pipe.
 Tighten the fastening toggle.
Tilt the interior cleaner:
 Loosen the fastening toggle for tilting.
 Set the inclination (±15°) of the interior
cleaner.
 Tighten the fastening toggle.
Selecting the nozzle
Flow volume [l/h] Pressure [MPa] Number of nozzles Nozzle size [mm] Order No. 3.632-
035.0
3.632-
049.0
3000 5 4 1,8 4.765-007.0 o o
3000 5 2 2,4 5.765-007.0 x x
Start up
Adjust speed
1
Cover with frame
Swivel frame
26 EN