Kärcher HKS 100, Original Instructions Manual

Page: 24 / 136

-
9
1)
= acetone operation impossible
-- = inconsistent, use impossible
x = consistent
ATTENTION
When operating with solvents, the sealing
materials are less resistent, therefore they
must be flushed immediately after use! En-
quire with Kärcher!
1 Caustic soda max. 10%, without hy-
pochlorite particles
2 Potassium hydroxide max. 10%, with-
out hypochlorite particles
ATTENTION
– The material will be worn off faster
when using hydrochloric or sulfuric ac-
ids; therefore it must be rinsed/neutral-
ised immediately!
– Contaminated acids will decrease the
resilience!
– Enquire with Kärcher if needed!
1 Nitric acid max. 10%.
2 Acetic acid max. 10%.
3 Formic acid max. 10%.
4 Phosphoric acid max. 10%.
5 Citric acid max. 10%.
6 Sulfuric acid max. 0.5%.
7 Hydrochloric acid max. 0.5%.
If other cleaning liquids are used, their resil-
ience must be checked by means of the
materials list! These cleaning liquids can
only be used after being released by Kärch-
er!
Cleaning liquids
Order No. Water Fully desalt-
ed water Water with alka-
line cleaning
agent Water with acid
cleaning agent Brines Acids solvents Use in the
food sector
Example: Kärch-
er cleaning
agents RM31 Example: Kärch-
er cleaning
agents RM25
max. +60 °C max. +60 °C max. +60 °C max. +60 °C max. +60 °C
3.632-035.0 x x 0-2% 0-1% LA SR LM
1)
--
3.632-049.0 x x 0-2% 0-1% LA SR acetone --
solvents
LM Solvents (max. temperature
+60 °C)
Brines
LA Brines (max. tempe60 °C)
Acids
SR Acids (max. tempe60 °C)
Other cleaning liquids
24 EN