Kärcher HDS-C 9/15, Original Instructions Manual

Page: 27 / 152

-
11
German,Order.-Nr.: 5.391-558.0
English, Order no.: 5.391-559.0
French, Order no.: 5.391-560.0
Italian, Order no.: 5.391-561.0
Spanish, Order no.: 5.391-562.0
Portuguese, Order no.: 5.391-563.0
Dutch, Order no.: 5.391-564.0
Greek, Order no.: 5.391-565.0
Polish, Order no.: 5.391-566.0
Order no.: 6.414-278.0
Order no.: 2.641-310.0
Order no.: 2.641-320.0
Order no.: 2.641-297.0
Order no.: 2.641-333.0
Order no. : 6.288-020.0
Order no. 6.288-050.0
Order no. : 6.288-072.0
Order no. : 6.288-116.0
Order no. : 6.290-911.0
For softening
몇
WARNING
Note the packaging information before us-
ing the detergent.
Do not use the following detergents:
– Detergents containing nitric acid
– Detergents containing active chlorinate
Using such detergents will damage your
equipment.
RM 100 ASF
RM 101 ASF
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Faults without display
Fault Possible cause Remedy By whom
Plant is not running Mains fuse have got triggered Check mains fuses and mains voltage Operator
No pressure build-
up in the plant or
pump is knocking Amount of water supply is too low. Check water supply level (refer to technical data). Operator
Pipe is blocked Check all pipes to see that there are no blockages Operator
System is sucking air Check system for leaks, the detergent suction hoses
must lie in the detergent, refill detergent container. Operator
Only HDS-C 7/11, HDS-C 9/15: Heating coil
has heavy calcium deposits Softening using RM 110 is not working. Rectify cause,
decalcify the plant. Operator, Cus-
tomer Service
Pump leaky (more
than 3 drops of wa-
ter per minute) Defective pump part Replace defective part. Customer Ser-
vice
Detergent is not
taken in Filter or hose is blocked Clean the parts. Operator
Backflow valve stuck Remove suction hose from pump head and loosen the
recoil valve using a blunt object. Operator
Solenoid valve is defective Replace valve. Customer Ser-
vice
High pressure
pump is sucking in
air. Detergent container is empty Refill detergent. Operator
Only HDS-C 7/11,
HDS-C 9/15: Burn-
er does not ignite
or the flame glows
off during opera-
tion Washing programme with hot water not se-
lected. Select another washing programme. Operator
Water shortage Check water supply, check connections, clean water
shortage safeguard. Operator
Fuel filter dirty Change fuel filter. Operator
No ignition Check ignition. Customer Ser-
vice
Check ignition electrodes. Customer Ser-
vice
Too low water tem-
perature for hot
water operations Temperature has been set too low. Set the thermostat to a higher level. Operator
Nozzle in spray pipe is rinsed out. Define the quantity to be transported by the pump. Re-
place nozzle if the specifications given in the technical
data are exceeded with a large margin. Operator
Only HDS-C 7/11, HDS-C 9/15: Heating coil
has heavy calcium deposits Softening using RM 110 is not working. Rectify cause,
decalcify the plant. Customer Ser-
vice
Only HDS-C 7/11, HDS-C 9/15: Heating coil
sooted Remove the soot from the heating coil. Customer Ser-
vice
Accessories
Attachment sets
Sticker Operating Instructions
Water filter G 1"
Lance holder
Hose holder
Coin acceptor
Coin counter
Fuel
Engine oil Hypoid SAE 90
Engine oil 15W40
Silicon grease
Lock grease
Steel care product
Softener liquid RM 110
Detergent
RM 806 ASF, 1+3 Dosing ml/
min
HDS-C 9/15 120...150
HDS-C 7/11 98...120
HDS-C 8/15-E 110...135
Lime solvent
Warranty
27 EN