-
3
Stop the washing programme by touch-
ing the "Stop" button on the touch-
screen.
Note:
With some washing plant designs stopping
the washing programme is not possible. In
this case, the "Stop" button is not dis-
played.
Washing stopped.
Select "continue" to continue wash.
The end of the washing programme and
the drive-out direction are shown on the
touchscreen.
Program end: Reverse vehicle out of
the washing bay
Program end: Drive vehicle forwards
out of the washing bay.
Display outside opening hours.
Note:
The opening times are set on the washing
bay. The CR 214 receives the times and
displays them outside of opening times.
Frost protection active.
A safety switch was actuated.
The affected safety button is displayed.
Eliminate reason.
Reset safety switch.
Press "Continue" on the touch screen.
Vehicle is incorrectly positioned.
Eliminate reason.
Reset safety switch.
Press "Continue" on the touch screen.
Washing plant failure!
Rectify failure using the operating in-
structions of the washing plant.
Note:
A programme started prior to the failure
cannot be continued.
Network connection to washing bay is inter-
rupted.
Check network connection and restore.
Emergency off has been pressed.
Main cabinet is not closed on washing bay.
Close and lock door.
Press "Continue" on the touch screen.
Water distribution doors are not closed on
washing bay.
Close and lock door.
Press "Continue" on the touch screen.
Stopping the washing programme
Programme completed
Plant closed
11
EN
Summary of Contents for CR 214
