Kärcher BDP 55/1900 W Bp, Manual

Page: 26 / 242

26
English

Danger
Risk of injury! Before carrying out any tasks
on the machine, set the main key to "0" and
remove key and plug of the charger.
Î
Drain out the dirt water and dispose it off.
In case of faults that cannot be remedied us-
ing the table below please contact the cus-
tomer service.
Faults
Fault Remedy
Appliance cannot be
started Stand-by, turn key switch to "0", then set it back to "1".
Check fuse F2*, replace if required. *
Check battery; charge it if required.
Machine does not
move Check whether the immobilizing brake (optional) has been ap-
plied.
Insufficient vacuum
performance Clean the seals between dirt water reservoir and cover and
check for tightness, replace if required.
Check suction hose for blockages; clean if required.
Check the suction hose for tightness; replace if required.
Check if the cover on the dirt water discharge hose is closed
Insufficient cleaning
result Set/ adjust contact pressure.
Check the pad for wear, replace if required.
Pad does not turn Reduce contact pressure.
Check if foreign bodies are blocking the pad; remove the foreign
bodies if required.
If over-current switch in the electronics system has been trig-
gered, turn key switch to "0", then set it back to "1".
* Remove screws of the electronics system and tilt the electronics cover with charger
downwards
Accessories
Description Part no.: Description Piece Ma-
chine re-
quires
piece
Polishing pad, white 6.368-400 5 1
Polishing pad, red 6.369-017 5 1