BR/BD 100/250 R BP / RI
Unit functions
Page 53 / 171
Service Manual 08.2007
3.3 Operator functions
Note:
Apart from the test mode and setup menu,
the service diagnosis will be introduced at a
later date.
For operator
For service technician
Bedienerfunktionen
1.
Drive (without cleaning
functions)
2.
Wet scrubbing
(with suction)
3.
Wet scrubbing
(without suction)
4.
Suction (without
scrubbing mode)
5.
Polishing (without suc-
tion)
6.
Polishing (with suction)
7.
Hand cleaning (optional)
Operator settings:
The operator can change
the settings:
– Water volume
– Brush pressure
– Brush speed (FACT)
– Working speed
– Chemicals quantity (optional)
Test-Modus
– Drives
– Lifting motors
– Calibration
1. Functional note on test
mode
The respective test modes can
be selected using the rotary
function info button. After sel-
ection the display begins to flash
after 3 seconds, this means
that the test mode is active and
the tests can be carried out.
2. Display mode
– I-drive
– I-brush
– I-motor
– I-Lifting motor brush head
– I-lifting motor suction beam
– Direction of travel switch
function
– Seat switch function
– Drive pedal function
– Elect. Ball valve (open-clo-
sed)
– Limit position – brush head
(raised - lowered)
– Limit position – suction beam
(raised - lowered)
– Electronics compartment fan
(Off - ON)
– Cleaning module tempera-
ture
– Lifting module temperature
– Accessories module tempe-
rature
Functional note on display
mode
In this mode only data such as
current, voltage, etc. are dis-
played without flashing.
(See Chapter 5.1 / 5.2)
Setup menu
– System parameters
– Driving module parameters
– Cleaning module parameters
– Lifting module parameters
(See Chapter 5.3)
