Reports
91
9.1.
Creating reports
In order to create an anti-virus scan report:
1.
Create a report template (see section 9.2, page 92) or select an
existing template.
2. Check the Create report box on the General tab of the report
template configuration window (see Figure 35).
As a result, a new report will be created within intervals specified in the schedule.
In order to view the results of the anti-virus scan, open the report for the
corresponding reporting period (see section 9.3, page 95).
There is a possibility to receive reports by request, irrespective of the scheduled
time, which can be useful when you need updated information about the current
information, for example, during virus outbreaks.
In order to create anti-virus server scan report on-demand,
1.
Select the Report templates folder in the console tree.
2.
Select the report template you need in the table displaying the list
of created templates (see Figure 33).
3.
Open the shortcut menu and use the Create a report command or
the analogous command under the Action menu.
A report will be created only if creation of reports based on this
template is enabled, i.e. if the
Create report
s box in the
Gen-
eral
tab of the report template settings window (see Figure 35)
is checked.
The report will be created based on the information about the anti-virus
scans results, saved by the application. In order to reduce the amount of
the information stored, a restriction can be imposed on its storage period.
By default the information is stored for a period of one year.
The information about the sources of infected objects and malicious ob-
jects detected displayed in reports is limited by 10 lines. You can view ten
most infected sources and top ten types of detected malicious objects.
In order to restrict the storage period for the anti-virus scan results,
1.
Select the Report templates folder in the console tree.