KAPERSKY ANTI-VIRUS 5.5 - FOR CHECK POINT FIREWALL-1, Administrator'S Manual, Page: 65 / 141

Anti-virus protection
65
Figure 16. Enabling anti-virus protection
7.4. Scanning HTTP traffic
In order to configure the settings for scanning data transferred via HTTP
protocol:
1. Select the node corresponding to the required server in the console
tree and follow the
HTTP traffic settings link in the results pane.
Configure the anti-virus operation settings for scanning HTTP traffic on
the tabs of the
HTTP traffic scan settings
window that will open (see
Figure 17).
2. On the Settings tab (see Figure 17) check the Scan HTTP traffic in
order to enable scanning. After this specify the values of the
settings that control:
•
transfer of unscanned data to the user if the object scan takes a
long time;
•
object scan when the object is accessed again;