44
Kaspersky Anti-Virus 5.5 for Check Point
TM
Firewall-1
®
For detailed information about secure connection types and
default values for various versions of Check Point
TM
Firewall-
1
®
visit the Check Point
TM
corporate website at:
http://www.opsec.com/developer/gw_comm_mode.html
Figure 11. Configuring additional OPSEC
TM
settings
3. Select
the
Parameters
tab (see Figure 12). This tab displays
settings used to control the data exchange between the Security
Server and Check Point
TM
Firewall-1
®
. Specify the required values.
•
Specify the maximum time (in seconds) the Security Server will
wait for the data to be received from Check Point
TM
Firewall-1
®
in the
Connection timeout
field in the
General
section. If no
information has been received within this period of time, the
Security Server will disconnect from Check Point
TM
Firewall-1
®
.
The connection will be established later when Check Point
TM
Firewall-1
®
transfers data subject to anti-virus processing. The
default value is 120 seconds.
•
Establish the frequency (in seconds) for the Security Server to
issue the confirmation signal used to maintain the connection
with Check Point
TM
Firewall-1
®
in the
Confirm connection
every
field of the
General
section. The suggested default value
is 5 seconds.
•
In order to ensure the output of registered Anti-Virus operation
events into the Check Point
TM
Firewall-1
®
event logs and to
ensure notification about such events using Check Point
TM
Firewall-1
®
tools, check the
Notify about events via ELA
protocol
box. After this:
o
Select the option to determine the way notifications will be
made from the
Notification type
drop-down list. Select the