COMMANDS
9
CANPac
n
(n = $00 – $FF)
default $19 (Ctrl-Y)
All units
Packet
This command is used to change the cancel-packet command character. When in the Convers
Mode entering a
Ctrl-Y
will cancel all keyboard input back to the last unpassed SENDPAC character
(unless PACTIME has expired and CPACTIME is turned on).
This character also functions as a cancel-output character in Command Mode. Typing the cancel-
output character a second time re-enables normal output. For example, if you've told the TNC to
do a DISPLAY, a
Ctrl-Y
will stop the display and a second one re-enables the
cmd:
prompt after
the next
<CR>
.
See also: canline, cpactime, sendpac
CCitt
ON | OFF
default ON
KAM
RTTY
When ON, the European RTTY code (ITA2) is used in the RTTY Mode. This code differs from US
TTY codes in the following four characters:
ITA2 US TTY's
BELL
'
+
=
'
BELL
"
;
default OFF
KPC-2
/
KPC-2400
Packet
When OFF, standard Bell 103 or Bell 202 tone pairs are selected. When ON, the CCITT v.21 or v.23
tone pairs are selected. The specific pairs are determine by the settings of the HF and HFTONES
commands. The following chart shows the relationship of these three commands:
CCITT
HF
HFTONE
TONE PAIR
off
off
off
off
on
on
on
on
off
off
on
on
off
off
on
on
off
on
off
on
off
on
off
on
1200/2200 (Bell 202)
1200/2200 (Bell 202)
1070/1270 (Bell 103)
2025/2225 (Bell 103)
1300/2100 (CCITT v.23)
1300/2100 (CCITT v.23)
980/1180 (CCITT v.21)
1650/1850 (CCITT v.21)
See also: hf, hftones
