32
DN1611-1809
Configuring with a Static IP Address (continued)
Configuring the
Gateway
1. In EntraPass Global Edition Workstation main window, move to the
Devices
toolbar and click
Gateway
.
Figure 17: Gateway Dialog - General Tab
2. Click the down arrow next to the text box marked
Gateway
and scroll down the selection of gateways
until you reach the KT-NCC gateway you have just saved. The KT-NCC gateway will appear along
with a number on the right-hand side of the dialog.
•
You can rename the KT-NCC gateway in the
French
and
English
fields.
3. Click the
General
tab.
4. Select the
Number of controller loops
in the text box under
Loop Configuration
. The KT-NCC can
physically support 7 controller loops.
5. In the
KT-NCC - Time Zone configuration
area, you must select the appropriate
Time zone setting.
Note:
It is advisable to check with the Network Administrator if the site where you are installing the KT-
NCC is situated in an area where daylight saving time is in effect.
6. Check the box underneath it if you want the system to
Automatically adjust the clock for daylight
saving changes
.
7. When applicable select the
Graphic
or
Video View
that pertains to the KT-NCC.
8. Move to the
Ethernet Port #1
tab.
