34
DN1611-1809
Configuring in a WAN
In this type of architecture the EntraPass Server site is distant from the KT-NCC site module and the two
communicate through the Internet.
After you have verified the port forwarding configuration with the Network Administration, connected the
KT-NCC to the EntraPass network and registered the KT-NCC to EntraPass Global Edition Server, you
will configure the server parameters.
Configuring
Server
Parameters
1. From the
Options
toolbar, click the
Server Parameters
tab.
Figure 19: Server Parameters Dialog WAN
2. Select the
Gateway
tab, then
KT-NCC
.
3. The option
Inbound Server Router
should be already checked.
4. Enter the
Public IP Address
of inbound router or the
Domain Name
. This address is assigned by the
public network provider to whom you are connected.
5. Click
OK
to save the configuration and close the dialog.
Configuring the
Gateway
1. In EntraPass Global Edition Workstation main window, move to the
Devices
toolbar and click
Gateway
.
Figure 20: Gateway Dialog - General Tab
