INTEGRA ARINC e-NAV
DESCRIPTION, INSTALLATION,
OPERATION MANUAL
PAGE: 5 of 14
REF.: DOC13033
INDEX: B
DATE: SEP 14/2016
© Orolia S.A.S.
3. INTEGRA ARINC e-NAV CONNECTION
3.1. Connectors and Cables
3 separate shielded cables have to be wired to the plug connected to the 19
Pin male socket.
A 2-Wire cable to connect INTEGRA ARINC e-NAV to the On Board 28 V
DC power supply.
A 2-Wire cable to connect INTEGRA ARINC e-NAV to the On Board GPS
equipment
A 6-Wire cable to connect INTEGRA ARINC e-NAV to the ELT
Wires of AWG24 gauge should be preferred.
A 19 Pin female plug reference SOURIAU 851 06 R 14 19 S 50 shall be used
to connect the INTEGRA ARINC e-NAV (this plug is not provided)
Figure 5: 19 Pin female plug, View from Back Face of Inserts
3.2. Connection to On Board 28V DC Power Supply
Refer to Section 7, Connecting Diagram
3.3. Connection to On Board GPS Equipment
Refer to Section 7, Connecting Diagram
3.4. Connection to INTEGRA (ER-N) ELT
Fabricate a 6-wire cable long enough to reach the INTEGRA (ER-N) ELT.
On the ELT side, connect a DIN-12 connector, P/N S1820514-03 (Not
supplied).
IMPORTANT: It is not possible to use a programming dongle in this
cable.
Refer to Section 7, Connecting Diagram
Summary of Contents for INTEGRA ARINC e-NAV
Page 19: ......
