INTEGRA ARINC e-NAV
DESCRIPTION, INSTALLATION,
OPERATION MANUAL
PAGE: 1 of 14
REF.: DOC13033
INDEX: B
DATE: SEP 14/2016
© Orolia S.A.S.
1. SYSTEM PRESENTATION
1.1. General
INTEGRA ARINC e-NAV is an External Navigation Device (END) used for
INTEGRA (ER-N) ELTs family and navigation equipment through
ARINC 429/743.
INTEGRA ARINC e-NAV External Navigation Device is used to store GPS
data coming from an on-board GPS ARINC429/ARINC743 output.
The position data is transmitted in the 406 MHz distress message as soon
as the ELT is activated.
This manual contains information to install and operate the INTEGRA
ARINC e-NAV, Part Number S1850581-01.
1.2. INTEGRA ARINC e-NAV Presentation
The INTEGRA ARINC e-NAV is composed of:
1. A housing to protect the electronic PCB.
2. An identification of the Firmware version on the cover of the housing.
3. A LED to indicate the INTEGRA ARINC e-NAV status.
4. A 19 Pin male socket to connect the INTEGRA ARINC e-NAV to the
ELT, A/C +28V DC and on board GPS.
5. Two fixing supports to attach the housing to a mounting bracket.
6. An identification label on the top of the housing.
Figure 1: INTEGRA ARINC e-NAV Overview
Summary of Contents for INTEGRA ARINC e-NAV
Page 19: ......
