Maintenance
118
②
Any severe scratch, abrasion and mechanical damage to the
surface paint layer will result in bodywork corrosion.
Vehicle Wash
Make the body cleaner.
When cleaning the body, follow these steps:
①
Use high pressure water flow to flush the vehicle body
surface to remove mud and soil. The water quantity should
be appropriate and sufficient to loosen the dirt and wash it
away. The vehicle washing water should be continuous
high-pressure water flow, and it is possible to wipe the
vehicle body with the help of sponge, soft brush or similar
articles, but not with foam plastics and other harder articles.
②
The complete vehicle body can be wiped gently with a piece
of sponge or soft cloth dipped with some neutral cleaner or
soap solution for vehicle washing purpose, and during
wiping, the sponge or cloth should be dipped in the vehicle
washing solution from time to time.
③
In case that the dirt are fully washed away, immediately use
high pressure water flow to flush away the cleaner and
solution on the vehicle body.
④
After being flushed, use a soft towel or rag to gently wipe
the vehicle body clean, and park the vehicle at a place being
free from direct sunshine, and have it dried naturally.
Warning !
When using a commercially available vehicle washing
product, please conduct operations based on the Operating
Instructions.
● After washed, the brake shall be checked for dry, and if not,
engage the low-speed gear and repeatedly brake slightly to dry
it.
When cleaning the vehicle lower parts, protective boards and
other sharp components, you should wear gloves and long
sleeves to prevent your hands and arms from injuries.
Inside Cleaning
Tidy up the vehicle interior items usually to keep the interior
clean.
Keep internal cleaning, maintain the plastic articles, prepare soap
solution or neutral cleaner solution and mix it with warm water,
use a piece of sponge or soft cloth to dip some solution and apply
the solution to the plastic articles, keep it for several minutes to
loosen the dirt, and then use a piece of clean and wet cloth to wipe
away the dirt and solution on the surface. If there are stains still, it
is possible to repeat the steps mentioned above. When desired to
maintain the textiles, first use a vacuum cleaner to absorb surface
dust, and use a piece of clean and wet cloth with soap solution to
clean the contaminated area, as well as use another piece of
slightly wet cloth to absorb the washing solution on the surface
and wipe the surface clean. Of course, it is possible to purchase
textile cleaner on the market, and hence, it is required to conduct
cleaning based on the manufacturer’s instructions.
