Light and Vision
31
road. do not adjust the illumination distance of the lights too far,
for fear that the road users on the opposite side are affected.
Flashing Alarm Device
The flashing alarm device is used to make the users on any other
roads pay more attention to your car in a dangerous situation.
Center console: switch for flashing alarm device
−
Press the switch of flashing alarm device to turn on or turn off
the flashing alarm device.
−
When the flashing alarm device is turned on, all steering lights
of the vehicle will flash simultaneously. The indicator light
of turn signal light on the meter also flashes at the same
time. Even if the ignition system is turned off, the flashing
alarm device can still work.
Instruction
In such as following situations, please turn on the flashing alarm
device:
This car is the last one in a traffic jam.
The car is in trouble or in an emergency.
Tow or towed by any other car.
Shift Lever of Turn Signal Light and High Beam Light
Use the toggle lever of turn signal light and high beam to operate
the turn signal light and switch low beam and high beam.
Shift lever of turn signal light and high beam light
Operate the toggle lever of turn signal light and high beam.
−
Move the lever up to activate the right turn signal light. At this
time, the right turn signal light of the car is turned on, and the
right turn signal light
on the meter is on at the same time.
−
Move the shift lever down to activate the left turn signal light.
At this time, the left right turn signal light of the car is turned
on, and the right turn signal light
on the meter is on at the
same time.
−
Push the shift lever forward to switch the headlights to high
beam light. At this time, the low beam light is off, and the
indicator light
of high beam on the meter is on.
