Wheel and Tire
95
Wheel Nuts
The wheel nuts must match the rim.
The rim and
wheel nut
are structurally matched with each other.
Therefore, every time the wheel is modified to another rim (such
as the rim of a winter tire), the corresponding wheel nut with the
correct length and nut shape must be used. This determines the
tightness and fixation of the wheels and the function of the
braking system.
KANDI-authorized service station may teach you how to refit
tires, rims and install wheel trim covers.
The wheel nuts must be clean and easily screwed.
Winter Tires
When running on icy roads in winter, the driving performance of
vehicle can be improved by using winter tires.
−
Please only use winter tires with radial structure.
−
All the four wheels shall use winter tire.
−
Only use the winter tires that are applicable to this vehicle.
−
Please note that the maximum speed suitable for winter tires is
relatively low, and the tread pattern should be deep enough.
−
After installing wheels, check tire pressure.
Driving with winter tires in winter can obviously improve the
driving performance of vehicle. Because of the different structure
in width, rubber composition and tread design, the anti-skid
ability of summer tires on ice and snow is poor.
When the tire pattern is worn to 4mm, the winter tire will lose its
applicability in winter to a great extent.
If the winter tire has
worn out
, even if the pattern depth obviously
exceeds 4mm, it will lose its applicability in winter to a great
extent.
According to the speed sign letter, the following
speed limit
applies to winter tires:
Q
160 km/h
S
180 km/h
T
190 km/h
H
210 km/h
V
240 km/h
(Pay attention to restrictions)
Warning !
Never exceed the maximum speed allowed by winter tires,
otherwise traffic accidents may occur due to tire failure and
vehicle out of control.
Information About Environmental Protection
It is necessary to change to summer tires in time, because they have
better driving performance on roads without ice and snow. Lower
rolling noise, less tire wear and most importantly, lower fuel
consumption.
