35
7.
The pressure release valve and
the lid lock actuator sit side by
side in the lid and should be
cleaned both from the top and
the bottom regularly.
8.
To clean the pressure release
valve, remove the pressure
release valve cover by pulling
upwards away from the lid (See
Fig. 12). Clean the cover in warm,
soapy water and dry thoroughly.
Ensure the pressure release valve
is clean as per point 10 before
replacing the cover.
Fig. 12
9.
On the underside of the lid,
both the pressure release
valve and lid lock actuator are
located beneath the protective
removable metal basket.
Regularly check and clean the
lid lock actuator, pressure release
valve and metal basket for food
or residue to avoid any clogging
which could result in blockage.
Pull the removable metal basket
away from the lid to access
(See Fig. 13) Clean the metal
basket in warm, soapy water
and dry thoroughly. Clean the
pressure release valve and lid lock
actuator as per points 10 and
11 before replacing the metal
basket.
Fig.13
10.
To clean the pressure release
valve (See Fig 14), with both the
pressure release valve cover and
the metal basket removed, wipe
around the valve with a damp
cloth. Using an object such as a
skewer poked through can assist
with cleaning and clogged food.
Refit the pressure release valve
cover and metal basket when
clean.
Fig.14
11.
The lid lock actuator has an
opaque plastic cap and moves
up and down (See. Fig. 14). To
clean, wipe any oil or food residue
with a damp cloth. Ensure that the
lid lock actuator moves up and
down freely after cleaning. Refit
the removable metal basket once
clean and before using.
Lid Lock
Actuator
Pressure
Release
Valve
Summary of Contents for KPR820
Page 2: ...KPR820 INSTRUCTION BOOKLET...
