32
GB
On/Off
This function is used to switch the stove and the
remote control on or off. Keep the key pressed for
at least two seconds to switch the system on or
off. Then press the key SEND.
You can use the two keys to set the wished
temperature between a min. value of 7°C and a
max. value of 40°C.
Please join the following procedure to set the
functioning mode:
Automatic Functioning
power 1
(on1)
power 2
(on2)
power 3
(on3)
power 4
(on4)
power 5
(on5)
SEND
Use this key to transmit the selected information
to the pcb.
ECONO
This key activates or deactivates the function
ECONO. Keep the key pressed for at least two
seconds to activate or deactivate this function.
TURBO
This key activates or deactivates the function
TURBO. Keep the key pressed for at least two
seconds to activate or deactivate this function.
CLOCK FUNCTION
Please join the following procedure to set the clock
function on the remote control:
- press the symbol
and the time blinking.
- use the keys
and
to set hour and
minutes.
- press
again to confirm and SEND to transmit
the function to the pcb.
ON1
Using this key you can set a single time schedule for
the automatic switching on of the stove (program 1).
OFF1
Using this key you can set a single time schedule
for the automatic switching off of the stove
(program 1).
ON2
Using this key you can set a single time schedule
for the automatic switching on of the stove
(program 2).
OFF2
Using this key you can set a single time schedule
for the automatic switching off of the stove
(program 2).
AUTO
With this key you can decide to repeat the
programmed switching on and off (program 1 and
2) every day. The key AUTO activates this function.
Keep the key pressed for at least two seconds to
activate or deactivate this function.
CANCEL
Use the key CANCEL in the event you want to
cancel some programmed switching on or off of
the stove.
LCD 2
Keys and main functions
The remote control can be used
to check the stove. The remote
control offers some functions
which are not available from
the keyset, like the automatic
programming of the switching on
and off of the unit.
How to use the remote control:
1. Direct the remote control on
the control board of the stove
2. Check there are no obstacles
between the remote control and
the receiver on the stove
3. Every function you set on the
remote control must be confirmed
pressing the key SEND. After
selecting the wished function, an
acoustic signal will confirm your
choice.
Remote control (if any)
