Kalmor Kagurobo Polfa, Manual

Page: 11 / 32

9
Body
Power switch ［ー］ Power ON ［◎］ Power OFF
Exhaust vent of
the sample
This is an exhaust vent of the sample. It is possible to connect a tube
with an outer diameter of 6mm (* Tefl on tube is recommended).
Suction nozzle
attaching
This is inlet of attachment suction nozzle. This suction nozzle can be
connected to a tube with an inner diameter of 4 mm. ( ※ Tefl on tube
is recommended)
Button NEXT Button： This is used to move to the next item / value in the
MENU screen.
MENU/ENTER Button： This makes moving to the MENU screen. It
is used as an enter button in the MENU screen. Peak value can be
displayed by 2 seconds press of this button.
BACK Button： This is used to return back to the previous item / value
in the MENU screen.
Serial number This is the unique serial number of this product. You may be asked for
this number when making an inquiry. So please have it ready when
you contact us.
microSD card slot This is a microSD card slot. Please insert the SD card deeply and fi rmly.
Although measurement is possible without the SD card, the data
collection function cannot be used.
Only 2GB or less capacity of microSD card can be used. If the capacity
is more than that, it may cause a reading error or a malfunction.
L i t h i u m c o i n
battery (CR2032)
slot
This is Lithium coin battery (CR2032) slot. Please insert it deeply and
fi rmly.
AC adapter socket This is a socket for AC adapter. When using the AC adapter, please be
sure to use the included adapter.
Cell batteries box Four alkaline dry cell batteries (AA) are inserted in here. By using dry
cell batteries, measurement is possible without the AC power.
Strap This is a hole to attach the included strap. Please use the strap to
prevent falling. Other straps that is commercially available can also be
attached.
（ 4 0 0 ）： D a t e
c o u n t - d o w n
during using Date
collect mode
This is displayed during data collection. It does count-down to start
writing data into the internal recording fi le. When it becomes 0, it starts
writing.Although the measurement is continued during writing, the
operation will become temporarily slow. So please be careful not to miss
the measurement value, for example, by interrupting the measurement
when it approaches 0.
Peak value
This is displayed only during peak measurement mode. Display / cancel
can be selected from the MENU or holding MENU button for 2 seconds.
Date and Time This shows the current date and time. If the date and time are not
correct, you can adjust it from the calendar function of MENU.
Simple
temperature and
humidity display
This is displayed only during temperature and humidity mode. T:
Temperature, H: Humidity