Kalmor Kagurobo Polfa, Manual

Page: 24 / 32

22
８ Recorded Data
Data recorded by data collection will be saved as csv format fi le in microSD card.
Data in the microSD card can be read by a PC.
※ A microSD / SD card slot is required on your PC to read an SD card. If there is only
an SD card slot, please use the accessory (also commercially available) microSD card
adapter to use the microSD card as an SD card.
※ You need spreadsheet software such as MS Excel to check and edit the data in csv fi le.
In the SD card, a folder is created with the name
of date at the measurement started, and a csv fi le
is created in the folder with the name of the hour,
minute, and second at the measurement started.
※ The extension (csv) may not be displayed
depending on the setting of your PC.
File Name： 144140.csv
Scale: 1
Date: 2016/02/10
Time Odor Temp Humi
14:41:41 324 28 50
14:41:42 324 28 50
14:41:43 324 28 50
14:41:44 323 28 50
14:41:44 324 28 50
14:41:45 324 28 50
The following information is stored in the csv fi le.
File Name (Hour, Min, Sec at the measurement started)
Scale (1 to 5)
Date (YYYY/MM/DD)
Time... HourMinSec Odor...Measuring value Temp...Temperature Humi...Humidity
When using the scale mode (scale: 2 to 5), the measured value is multiplied with
corresponding scale.To compare with other measurement data, it is necessary to consider
the value being used in scale mode.
※ During data collection, data recording is executed once for 400 plots. (Time varies
depending on the recording interval setting, like every 400 seconds if the recording
interval is set as 1 second, and every 800 seconds if the recording interval is set as 2
seconds.)
※ Please note that the data of the last 400 plots will be lost if you turn off the power
without properly stopping the data collection mode.
※ The number of plots stored in one csv fi le is approximately 64,000 plots (about 17
hours and 46 minutes in case of 1 second interval recording).