Kalmor Kagurobo Polfa, Manual

Page: 25 / 32

23
９ Daily Maintenance and Storage
Daily Maintenance
★ After the measurement is completed, please execute
idling operation under clean air environment before
turning off the power
By executing idling operation under clean air environment before
turning off the power, the sensor will last longer by removing the
odor that is absorbed to the sensor.If the measured value 300 or
less is shown under clean air environment, this is an indication of the
completion of idling operation.
★ Wiping dirty body with a dry cloth
If the main unit becomes dirty, please wipe the body with a dry cloth.
However, please do not wipe with synthetic fi bers that generates static
electricity, or with organic solvents such as alcohol or thinner, etc.
Storage
★ Storing the product with removing dry cell batteries
Leaving the batteries in the product may cause liquid leakage of
battery that cause product malfunction.
★ Do not store this product in the following places /
environment
● An environment temperature not in the range -10 to 50℃ .
● An environment where temperature changes rapidly and condensation
occurs easily.
● An environment that is vibrating.
● A place easily get wet, or highly humid with moisture or steam.
● A place exposed to direct sunlight, or place with large temperature
diff erences.
● An environment with corrosive gas or fl ammable gas.
● An environment with dust.
● In a room with automatic solder tank, or place where silicon material is
stored and used.
● In a room with high concentration of organic solvent by painting, or near
from such place.
● An environment with cigarette smoke or smell, like in a smoking room.