Kalmor Kagurobo Polfa, Manual

Page: 18 / 32

16
７ MENU Screen / Function Setting
７－１ MENU mode
７－２ D.COLLECT
Moving to MENU screen by pressing the MENU button.
In the MENU screen, detailed settings for each function can be set.
Moving to the MENU screen. Also it works as ENTER
function in MENU screen.
Moving up the item on the MENU screen, or forwarding the
value / cursor in the advanced settings
Return to the measurement screen from the MENU screen.
Or returning back the value / cursor in advanced settings
A function to record the measured values. (Please check if the SD card is surely inserted
before using.)
The data recording interval can be set at any time between 1 and 59 seconds and between
1 and 30 minutes.
【Notes】
● Continuous recording is possible as far as START / STOP is not executed, but it will be forcibly stopped
when the cumulative use time reaches 4,500 hours from the point of durability of the pump. Also, please
note that the maximum continuous recording time varies depending on the capacity of the SD card.
● The measured data is written to the SD card in every 400 seconds for 1 second interval PLOT, in every
400 minutes for 1 minute interval PLOT, or each time when data collection is stopped.
● Please note that the latest 400 PLOT data will be lost without stored, if the power is turned off without
stopping Data Collection properly.
Selecting the cursor and press
by
, then moving to the detailed
settings by
MENU mode
Detailed settings 1
Detailed settings 2
Setting any numerical value by
,
and entering by
Switching NO/YES by
and entering by
※ If NO is selected, it returns to the
measurement screen without any
setting.
When stopping the data collection, please select follows.
MENU screen → D. COLLECT → STOP OK? → YES