Lower air louver switch setting
Under the condition of meeting the ambient
temperature, the lower air louver can be opened
when the unit is turned on.
To select whether the lower air louver is on or
off, use the button on the electric control box.
Within 10 minutes of power-on, press it for
5 seconds to enter the mode in standby state.
Press it to open or close the lower air louver.
NOTE: During the setting process, the display
panel displays the switch status of the lower air
louver.
on - open
of - closed
Adjusting Air Flow Direction
CAUTION
Do not try to adjust the horizontal louver by
hand. This may cause damage the
mechanism and result in condensation
forming on the air outlets.
Manual Swing:
Press Air Direction to fix the
louver at a desired angle.The louver swings
(upward or downward) at a different angle
with each press of the button.
The air direction can be changed by
manually adjusting
air louve
r.
When cooling
Adjust the louver downwards (horizontally).
When heating
Adjust the louver vertically.
•
•
•
•
Electric control box
Air louver button
Care and Maintenance
Cleaning Your Indoor Unit
BEFORE CLEANING OR
MAINTENANCE
ALWAYS TURN OFF YOUR AIR CONDITIONER
SYSTEM AND DISCONNECT ITS POWER SUPPLY
BEFORE CLEANING OR MAINTENANCE.
CAUTION
Only use a soft, dry cloth to wipe the unit clean.
If the unit is especially dirty, you can use a cloth
soaked in warm water to wipe it clean.
•
Do not
use chemicals or chemically treated
cloths to clean the unit
•
Do not
use benzene, paint thinner,
polishing powder or other solvents to clean
the unit. They can cause the plastic surface
to crack or deform.
•
Do not
use water hotter than 40°C (104°F)
to clean the front panel. This can cause the
panel to deform or become discolored.
Cleaning Your Air Filter
A clogged air conditioner can reduce the cooling
efficiency of your unit, and can also be bad for
your health. Make sure to clean the filter once
every two weeks.
WARNING: DO NOT REMOVE OR
CLEAN THE FILTER BY YOURSELF
Removing and cleaning the filter can be
dangerous. Removal and maintenance must be
performed by a certified technician.
1. Pull the left and right handles of the front panel ,
pull the panel outward, and open the panel.
5.
Rinse the filter with clean water and allow
it to air-dry.
DO NOT
let the filter dry in
direct sunlight.
6. Reinstall the filter.
2. Remove the air filter.
Press the claws on the right and left sides of
the air filter down slightly, then pull upward.
3.
Hold the tabs of the frame,and remove the
4 claws. (The special function filter can be
washed with water once every 6 months. It
isrecommended that you replace it once
every 3 years.)
4.
Clean the air filter by vacuuming the surface
or washing it in warm water with mild
detergent.
Air freshening filter
If using a vacuum
cleaner, the inlet
side should face
the vacuum.
If using water, the
inlet side should
face down and
away from the
water stream.
EN
46
