![background image](http://html1.mh-extra.com/html/kaindl/ssg-600-a-dc/ssg-600-a-dc_operating-instructions-manual_3208348016.webp)
K
AINDL
-S
CHLEIFTECHNIK
Change of grinding wheel
Mounting on the grinding wheel support (Corundum wheel)
Place the grinding wheel inside the dismantled grinding wheel support, and don’t forget the cardboard
for the grinding wheel
(Cardboard – grinding wheel - cardboard).
Turn the flange nut by hand on the grinding wheel support
Take the socket screw wrench (included) and tightly close the flange nut.
Disposing of the grinding wheel
Old grinding wheel can be disposed as “rest garbage”.
Diamond wheels, whose body material is aluminium, give to aluminium scrap metal.
Change of grinding wheel (Diamond wheel)
Dismount the grinding wheel cover (Picture ¼) with allen key SW 2,5 (included), while turning out
the 3 screws (M 4 x 12) and pull off the grinding wheel cover.
Now open the nut (SW19) on the motor spindle, while holding the motor spindle with an allen key (SW 6)
in the centre
After having turned out the nut, pull the wheel together with the support from the motor spindle.
The mounting of the new wheel is made in the reversed sequence
Attention!
Never operate the SSG 600 without correctly mounted grinding wheel protection!
16
Summary of Contents for SSG 600 A-DC
