Kaindl SSG 600 A-DC, Operating Instructions Manual

Page: 10 / 28

K
AINDL
-S
CHLEIFTECHNIK
Operation
The saw blades must be cleaned blank before sharpening.
Please use some steel wool with soap and warm water.
Only with a clean surface, a regular transport is granted.
General directions
HSS-circular saw blades
only to be sharpened with the supplied corundum grinding wheel
with this machine, a setting of the teeth is not possible
Carbide tipped circular saw blades
only sharpen with a diamond wheel
In order to keep the proportion of inside- and outside of teeth, please pay attention to the following:
Re-sharpen the back of tooth only each 4-6 times. This means after having sharpened the inside tooth
4-6 times, then sharpen one time the back of tooth.
In the further sequel of this manual HSS circular saw blades will not be mentioned any further, as the
complete adjustment is identical to carbide tipped - circular saw blades
Pay attention to the safety advises!
10