Kaindl SSG 600 A-DC, Operating Instructions Manual

Page: 15 / 28

K
AINDL
-S
CHLEIFTECHNIK
Checking in case of defects
automatic does not work
Check electric main connection, Rotation field as per DIN
Press return current switch
Magnet is placed below the switch-off sensor
Check the electric wiring and plug on the back of the control box
Potentiometer (pic. 5) on in position 0
Throttle setback valves of the air pressure cylinders are closed
Grinding- and feed cylinder work at same time
Check pipe connections for their correct colour (picture 5).
Exhaust
Separate dust exhaust
For a separate dust exhaust, we suggest one of the following dust exhaust types:
Description
Supplier filter class
SQ 450-3M
WAP cleaning Systems GmbH M
89287 Bellenberg (http://www.alto-online.com /)
ISA 15 K1-1
SORMA Paul Andrä KG M
73547 Lorch-Waldhausen
( http://www.lorch.de /)
If necessary, you will need an adaptor (pipe connection ø 36 mm) for your suction
pipe.
Cleaning and dressing of grinding wheels
Cleaning of diamond wheel
Use the saw blade as support for the cleaning stone (picture 6)
The gap between the saw blade and the diamond wheel should need exceed 3 mm
Start the motor and clean the diamond wheel with the cleaning stone.
Dressing of corundum grinding wheel
Mount the grinding wheel dresser on the porting arm (picture 9/82)
Dress the wheel by twisting the grinding wheel dresser and move forward by use of the hand wheel
(picture 1/9).
15