KaiCong—Nothing important than safety!
!
Note:
When the system clock reaches the end time, the system will judge whether the current implementation of the action initiated by a
timer first. If not, the action will not be canceled.
!
5.2.7 Power up action
After the system reboot, it will perform the appointed action. It includes: (1) Transferring preset points. (2) Performing sweep scan.
(3) Performing rotate scan. (4) Performing pattern scan. (5) Performing preset point cruise (6) Performing motion detection. (7)
Performing Motion tracking
!
5.2.8 Park action & park time
Definition of park action: without control of the machine. The product doesn’t perform any continuous action.
Park action: when the product comes to the park time in the circumstances of park, it will perform the appointed action. It includes:
(1) Transferring preset points. (2) Performing sweep scan. (3) Performing rotate scan. (4) Performing pattern scan. (5) Performing
preset point cruise (6) Performing motion detection. (7) Performing Motion tracking
!
5.2.9 Depth of field proportion deceleration (it require the camera read the zoom)
The product supports the function of depth of field proportion deceleration. It will read the zoom automatically and determine the
maximum speed of the product according to the zoom. The zoom of camera becomes bigger; the maximum speed by manual control
becomes lower.
!
5.2.10
Auto flip
In the process of operating the joystick to trace and monitor, if the user move the lens to the bottom (vertical) then continues pressing
the joystick, the lens will automatically flip 180º horizontally, then the user can still control it to move upwards till 90°, which
enables the user to directly observe the situation on the back side, thus fore-and-aft 180° consecutive monitoring can be realized.
!
5.2.11 Motion detection
The product supports 8 zones for motion detection. Every zone supports 4 regions. The sensitivity, the size of the target and the
position of region can be set.
!
5.2.12 Motion tracking
The product supports Motion tracking. It will trace the locomotive object and change the zoom of the lens to an opportune magnitude
when there is a locomotive object. The sensitivity, trigger tracking object size, and trigger tracking object speed can be adjusted to
different situation.
!
5.3 Menu Setup
5.3.1 Open the menu
Call or set up preset point
No.95
(a special preset point of system) to open the menu.
5.3.2 Basic patterns of menu
Menu includes 4 basic forms:
(1) “[******]”
This kind of menu item shows that the menu involves submenu.
(2) “<******>”
This kind of menu item shows that the number in”< >”can be changed by “up” and “down”, “left” and “right”.
(3)“******>”
This kind of menu item shows that press <IRIS OPEN> to enter configuration.
(4)“******
：
******”
This kind of menu item includes 2 parts, before “:”is the item of configuration, after”:” is the value of configuration. Pressing
<IRIS OPEN>and it will changed into“******
：
<******>”.Concerning <******>”, please see (
ⅱ
).
5.3.3 Basic operation of menu
Basic operation of menu: up and down, left and right, <IRIS OPEN>, <IRIS CLOSE>
Up and down, left and right: about ergodic menu item or modify the value of the item.
<IRIS OPEN>: to enter submenu, begin to modify the value of the menu item, confirm and save the value.
<IRIS CLOSE>: to return to the previous menu or cancel the modification of the value.
!!
9
