KaiCong—Nothing important than safety!
!
Press<IRIS OPEN>to enter Motion tracking. Move to menu item, press<IRIS OPEN>to modify the value of the corresponding menu
item—> move the joystick up and down, left and right to modify the value —> press<IRIS OPEN> to confirm and save, and
press<IRIS CLOSE> to cancel the setting.
TRACE ENABLE: whether open Motion tracking.
SENSITIVITY: setting the sensitivity of triggering Motion tracking.
OBJECT SIZE: setting the motion object’s size of triggering Motion tracking.
OBJECT SPEED: setting the speed of motion object.
BACK TIME: time of backing to the default scene when losing the motion target.
ZOOM TRACE: setting zoom of lens.
SET REGION>: setting the backing scene that back when it loses the object.
DELETE REGION>: delete the backing scene.
!!
!!
!!
!!
!!
!!
!!
!!
Press<IRIS OPEN>to enter motion detection. Move to menu item, press<IRIS OPEN>to modify the value of the corresponding
menu item—> move the joystick up and down, left and right to modify the value —> press<IRIS OPEN> to confirm and save, and
press<IRIS CLOSE> to cancel the setting.
ZONE NUM: support 8 zones. After starting motion detection, system will skip 8 zones by turns.
STATUS TIME: the status time of the zone.
[DETE ACH REGION]: setting the detach region of the zone. Every zone has 4 regions.
SET ZONE>: setting the zone
DELETE ZONE>: delete the zone.
START>: start the motion detection. It will exit the menu automatically when it starts.
Press<IRIS OPEN>to enter the submenu item of motion detection. Move to menu item, press<IRIS OPEN>to modify the value of
the corresponding menu item—> move the joystick up and down, left and right to modify the value —> press<IRIS OPEN> to
confirm and save, and press<IRIS CLOSE> to cancel the setting.
REGION NUM: a zone supports 4 regions.
REGION ENBALE: enable defined zone. 4 regions is in a condition of enable under acquiescence.
TRACE: whether start “trace” when it finds a motion object in the region.
SENSITIVITY: sensitivity of detach.
OBJECT SIZE: setting the motion object’s size of triggering motion detection
SET REGION>: start “set region”, you can set the appointed region’s position in the screen. After entering, move the joystick up and
down, left and right to set the start position of the region. Press “OPEN” to set the size of the region, then press ”OPEN” to finish
setting, and press ”CLOSE” to cancel the setting.
!
[PRIVACY SETUP]: setting private setup region.( needs support of the camera. It just supports SONY, NEWLG
camera privacy setup so far
19
