KaiCong—Nothing important than safety!
!
“ [Cruise Setup]” : Setting cruise scan of preset point
Press<IRIS OPEN>to enter cruise setup. Move to menu item, press<IRIS OPEN>to modify the value of the corresponding menu
item—> move the joystick up and down, left and right to modify the value —> press<IRIS OPEN> to confirm and save, and
press<IRIS CLOSE> to cancel the setting.
CRUISE ID: support 9 cruise of preset point.
[POSITION EDIT]: edit the preset point’s position of this cruise ID.
START>: start cruise scan. It will exit the menu automatically when it starts.
SET DEFAULT>: restore the cruise configuration of default preset point, state time and speed. Default state time is 5 seconds and
speed is 64-level.
Press<IRIS OPEN>to enter position edit. Move to menu item, press<IRIS OPEN>to modify the value of the corresponding menu
item—> move the joystick left and right to select “POS.”, “STATE TIME” and “SPEED”; move the joystick up and down to select
the value.—> press<IRIS OPEN> to confirm and save, and press<IRIS OPEN> to cancel the setting.
POS.: the number of cruise preset point.
STATE TIME: the time state after the dome jump to this preset point.
SPEED: the speed of jumping to one preset point.
!!
!
!!
!!
!!
!!
!!
!
“ [ Line Scan ] ”: Set scan between two point.
!
!!
!
!!
!!
!!
!!
17
Cruise Setup
Cruise ID: <…>
[Position Edit]
Start
Set Default
Return
Exit
Cruise Setup
Index Pos. Dwell Time Speed
1.
001 <1~255>secs 64L
2.
002 <1~255>secs 64L
3.
003 <1~255>secs 64L
4.
004 <1~255>secs 64L
Pre. Page
Next Page
Return
Exit
Running Setup
Preset Point
Region Setup
Cruise Setup
Pattern Scan
Sweep Scan
Circle Scan
Motion Detection
Motion Tracking
Return
Exit
Pattern Scan
Scan ID: <…> (4 Pattern)
Record
Start
Set Default
Return
Exit
Pattern Scan
Scan ID: <…> (4 Pattern)
Record
Start
Set Default
Return
Exit
Free Space
[ | | | | | | | | | | | | | | | | | | | ] 100%
OK>----------<Open>
Cancel>------<Close>
