KaiCong—Nothing important than safety!
!
!
Press<IRIS OPEN>to enter cruise setup. Move to menu item, press<IRIS OPEN>to modify the value of the corresponding
menu item—> move the joystick up and down, left and right to modify the value —> press<IRIS OPEN> to confirm and
save, and press<IRIS CLOSE> to cancel the setting.
Press<IRIS OPEN>to enter rotate scan. Move to menu item, press<IRIS OPEN>to modify the value of the corresponding
menu item—> move the joystick up and down, left and right to modify the value —> press<IRIS OPEN> to confirm and
save, and press<IRIS CLOSE> to cancel the setting.
SCAN ID: support 8 rotate scan.
SCAN SPEED: setting scan speed level of 360°, 64 levels in total.
SCAN DIR: direction of scan. Clockwise or anticlockwise.
SET START POS>: setting the start position of rotate scan. Press “OPEN” to enter the start position, and move the joystick
to make the lens move to the start position, then press<IRIS OPEN>to save the position.
START>:start the rotate scan. It will exit the menu automatically when it starts.
DELETE>: delete the scan
!!
!!
!!
!!
!!
!!
!!
[MOTION TRACKING ]: setting tracing attribute of motion object.
!
!
18
Running Setup
Preset Point
Region Setup
Cruise Setup
Pattern Scan
Sweep Scan
Circle Scan
Motion Detection
Motion Tracking
Return
Exit
Line Scan
Line ID : <…> (16 lines)
Speed: <…> (1-64L)
Dweell Time: <1-60mins>/
<1-60secs>
S c a n D I R : < C l o c k w i s e > /
<Counterclockwise>
Set Start Pos.>
Set End Pos.>
Start
Delete
Return
Exit
