Kahn Optisure Remote User Manual Download Page 47

Page: 47 / 54

Optisure Remote User’s Manual

March 2018

Application Software

The Optisure Remote features a USB interface for

communication with the application

software. A copy of the application software is supplied on a CD with the instrument.

The application software is also available from the support section of the Kahn

Instruments' website at: http://www.michell.com/uk/support/sware-downloads.htm

1. Installation

Extract the contents of the supplied zip file to a suitable location.

Close all currently running Windows programs.

Launch the installer and follow the on-screen instructions.

The installer will ask for an authorization code.

Enter

7316-MIL1-8000

Restart the PC to complete the installation.

Establishing Communications

When launching the application software, the Communications Setup screen will be

displayed. The following sections explain how to establish communication with the

Optisure Remote.

Communications Setup Screen

Summary of Contents for Optisure Remote























































Search results

Summary of Contents for Optisure Remote

Reviews:

Related manuals for Optisure Remote

Brands by name

Popular brands

Kahn Optisure Remote, User Manual

Search results

Summary of Contents for Optisure Remote

Reviews:

Related manuals for Optisure Remote

Brands by name

Popular brands