Kahn Optisure Remote, User Manual

Page: 25 / 54

Optisure Remote User’s Manual
18 March 2018
OPERATION
Display Hold Also holds measured and calculated values shown on the display throughout the course
of Data Hold
Available input: Off, On
Setpoint Mirror heating temperature during DCC, relative to last measured dew point
Available input: 10 to 40
Period Duration of a DCC
Available input: 0:01 to 0:59
Interval Time between automatic DCC cycles
Available input: 1 to 99 hours. Set 0 to disable automatic DCCs
Reset Optics Triggers a reset of the optical signal level on the next DCC cycle
Output Hold Time to hold the output at the last measured value after finishing a DCC
Available input: 4 to 59 minutes
Table 6 DCC Menu
3.2.2 Logging
Figure 15 Logging Screen