Optisure Remote User’s Manual
10
March 2018
INSTALLATION
2.5.4 Dew-Point Sensor Connection
The dew-point sensor contains the optical system and the chilled mirror. It is fitted with
an M12 connector to allow easy and secure connection to the instrument using the
supplied sensor cable.
Figure 6
Dew-Point Sensor Connection
2.5.5 Remote PRT Probe
1.
Rotate the body of the PRT probe connector until it locates in the socket
labeled
REMOTE TEMPERATURE
(See
Figure 7).
2.
Push the connector into the socket until it locks.
NOTE: Do not attempt
to force it into the socket. If it will not fit in, rotate it until the key
locks and it pushes in easily.
3.
To remove the connector, slide the connector’s body collar back along its
axis, away from the instrument, to release the lock and then gently pull the
connector body out of the socket.
NOTE: Do not attempt to pull it out
with the cable, make sure that the collar is first released.
Figure 7
Remote PRT Connection
Summary of Contents for Optisure Remote
