Kahn HygroPort I.S., User Manual, Page: 46 / 70

HygroPort I.S. User’s Manual
4.4 Graphics Display
While the primary display is indicating internal sensor parameters a graphical display of
the output can be obtained by pressing the scroll right key. An example of a chart is
shown in Figure 4.3. NOTE: If an external transmitter has been
configured, the chart will display the internal dewpoint.
Val 55.6
Min 55.3
Max 68.7
%RH
Minutes t
Typical chart display
The chart can be re-set at any time by pressing the Enter key followed by the
scroll right key.

Section 2.6.9 describes the chart options.
4.4.1 Display Datalog File List
Provided the instrument is not logging, the Datalog File List displays a complete list
of all the currently stored datalog files, together with the amount of memory space
available, by pressing the scroll right key when the chart is displayed. An example is
shown in Figure 4.4.
1.txt 1K 0130 1318  11 files
4.txt 4K 0315 1738

Not logging, press ENTER to setup logging
Figure 4.4 Datalog file list
The current page of files is shown. If they are visible, the

and

arrows located to
the right of the files display, indicate that a previous (

) page and a following (  ) page
are available for selection via the scroll up and scroll down keys.
To return to the chart press the scroll left key. To set up a new datalog file press the
Enter key.
Datalog files can be uploaded to a PC via a dedicated HygroPort I.S. application
software package by first enabling the instrument’s Bluetooth facility and pairing it
with a PC which has the software application package installed (refer to Section 4.7).
Issue 6, December 2019 35 Kahn Instruments
70
50
t-5
Figure 4.3
169K
used
8397K
Free
2.txt 1K 0130
1319
3.txt
15K 0305
1352