HygroPort I.S. User’s Manual
Gas Inlet /Outlet Fittings
HIGH PRESSURE! High pressure gases are potentially
hazardous. Energy stored in these gases can be released
suddenly and with extreme force. High pressure systems
should be assembled and operated only by individuals
who have been trained in proper safety practices.
Before making a measurement, the gas fittings should be attached to the instrument as
per Table 3.1 and
Figure 3.4.
1.
Install the required orifice fittings.
2.
Install any adaptors that might be required.
3.
If the small bore orifice fitting is not used then one of the
optional application kits could be installed (as shown in Figure 3.4).
Figure 3.4
Gas coupling examples for atmospheric pressure measurement
NOTE: The application kit shown in Figure 3.4 (excluding the orifice fittings)
is not supplied as standard, but is part of a range of kits which can be ordered
from Kahn Instruments, on request.
Issue 6, December 2019
27
Kahn Instruments
3.5.1
!
Summary of Contents for HygroPort I.S.
Page 2: ...Inside front cover blank...
Page 70: ......
