Kahn HygroPort I.S., User Manual

Page: 30 / 70

HygroPort I.S. User’s Manual
2.6.6 HMI Settings
To enter the HMI menu, highlight HMI from
the Main Menu by using a combination of the
scroll up and scroll down keys and press the

Enter key. The HMI Set-Up Menu is then
displayed, see Figure 2.13.
Initially the CONTRAST parameter is
highlighted and the current setting, e.g. 50%,
is displayed.
To select any of the other parameter fields, use
either the scroll up or scroll down keys to
highlight the required parameter and then
press the Enter key to enter the value
fi ield for that parameter i.e. PRIMARY DISP.
NOTE: This option is only accessible
if an external transmitter has been configured.
The current setting i.e. INTERN is then
highlighted and can be changed by using either
the scroll up or scroll down keys.
Press the Enter key to accept the value.
Figure 2.13 shows an HMI set-up screen and
the method of changing the primary display to
show the output of either the internal sensor
(INTERN) or the external transmitter (EXTERN).
Table 2.8 details the field values. To quit, press the scroll left key.
Parameter variable options
0 to 100%
in 5% increments.
Scroll value with the scroll up or

(down) keys, accept the selection with the Enter key.

0 to 100%
in 5% increments.
Scroll value with the scroll up or
scroll down keys, accept the selection with the Enter key.

ON, OFF.
Toggle with the scroll up or scroll down keys, accept
The selection with the Enter key.
OFF, 15 to 60 sec
in 15 sec increments. Scroll value using the

scroll up or down keys, accept the selection with the Enter key.
ENG, DEU, ESP, FRA, ITA, POR
Select with the scroll up
or scroll down keys, accept the selection with the Enter key.
INTERN, EXTERN
.
Set with the scroll up or scroll down
keys, accept the selection with the Enter key.
Table 2.8 HMI settings
Issue 6, December 2019 19 Kahn Instruments
% HMI
%
s
% HMI
%
s
% HMI
%
s
CONTRAST 80
BRIGHTNESS 75
KEY TONE ON
BL TIMEOUT 30
LANGUAGE ENG
PRIMARY DISP INTERN
x5
CONTRAST 80
BRIGHTNESS 75
KEY TONE ON
BL TIMEOUT 30
LANGUAGE ENG
PRIMARY DISP INTERN
CONTRAST
BRIGHTNESS
KEY TONE
BL TIMEOUT
LANGUAGE
PRIMARY DISP
CONTRAST
BRIGHTNESS
KEY TONE
BL TIMEOUT
LANGUAGE
PRIMARY DISP
80
75
ON
30
ENG
EXTERN
80 % HMI
75 %
ON
30
s
ENG
EXTERN
Figure 2.13 HMI settings
Parameter
CONTRAST
BRIGHTNESS
KEY TONE
BL TIME-OUT
(Backlight control)
LANGUAGE
PRIMARY DISP