manualshive.com logo in svg

KAESER M100, Operator'S Manual, Page: 46 / 384

Share
Download
KAESER M100 Operator'S Manual Download Page 46

Fig. 2 Location of safety signs

Item

Sign

Meaning

190*

max.

min.

Wrong cooling oil level!

Risk of machine defects or rising oil consumption (oil content for pure air).
➤ Check cooling-oil level.
➤ Run the machine only with proper cooling-oil level.

282*

Explosive hydrogen gas!

Severe injury or death could result from exploding gas.
➤ Keep flames, sparks and other sources of ignition away.

283*

Battery contains acid!

Severe injury result from contact with battery acid.
➤ Do not allow battery acid to contact eyes, skin, clothing or painted surfa‐

ces.

➤ Do not attempt to jump-start if battery fluid is frozen.
➤ Bring temperature of battery up to at least 60°F before attempting to

jump-start or it may explode.

303*

Fire or explosion caused by refueling!

Severe injury or death result from inflaming fuel.
➤ Use diesel fuel only.
➤ NEVER attempt to refuel the compressor while it is operating.
➤ Always replace fuel filter cap after refueling.
➤ Always wipe up fuel spills which may occur inside the compressor enclo‐

sure and allow the machine to ventilate.

* Location within the machine

** Only towable machines

*** Only machines with option dc

**** only machines with option ga, gb

3

Safety and Responsibility

3.7

Safety signs

34

Operator Manual    Screw Compressor   
M100  

No.: 9_6999 23  USE

Summary of Contents for M100

































































































































































































































































































































































































Reviews:

No comments