KAESER M100, Operator'S Manual

Page: 150 / 384

Starting the machine and performing a test run:
1. Start the machine and run in IDLE until the operating temperature is reached.
2. Close the outlet valves.
3. Shut down the machine.
4. Wait until the machine has automatically vented.
Pressure gauge reads 0 psig!
5. Open the outlet valves.
6. Open the left-hand door.
7. Check the oil level after about 5 minutes.
Oil level too low: top up if necessary.
8. Visually inspect for leaks.
9. Close the access door.
10.4.5 Oil separator tank dirt trap maintenance
Material Cleaning cloth
Wrench
Small screwdriver
Maintenance kit, control valve
Petroleum ether or spirit
Precondition The machine is shut down.
The machine is fully vented, the pressure gauge reads 0 psig.
Machine is cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
The negative cable to the battery is disconnected.
Fig. 68 Oil separator tank dirt trap maintenance
1
Oil separator tank cover
2
Control valve
3
Union nut
4
Oil return line
5
Nozzle
6
Screw-in connector
7
Gasket
8
Strainer
➤ Open the right-hand access door.
10 Maintenance
10.4 Compressor Maintenance
138
Operator Manual Screw Compressor
M100
No.: 9_6999 23 USE