KAESER M100, Operator'S Manual, Page: 152 / 384

Material Spares
Cleaning cloth
Wrench
Precondition The machine is shut down.
The machine is fully vented, the pressure gauge reads 0 psig
Machine is cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
The negative cable to the battery is disconnected.
➤ Open the right-hand access door.
10.4.6.1 Changing the oil separator cartridge
Fig. 69 Changing the oil separator cartridge
1
Control air line union nut
2
Oil scavenge pipe (screwed to the cover)
3
Oil scavenge pipe union nut (screwed to
the dirt trap)
5
Air pipe
6
Pipe fitting
7
Cover
8
Fixing screw
9
Control valve
10
Solenoid valve plug
11
Gasket
12
Metal clip
13
Oil separator cartridge
Changing the oil separator cartridge
1. Unscrew the union nuts
1
and
3
and place the components with connections carefully to one
side.
2. Pull out the plug to the solenoid valve
10
and withdraw the cable.
3. Unscrew the fitting
6
and turn the air pipe
5
to one side.
4. Remove the screws
8
securing the cover
7
to the tank.
10 Maintenance
10.4 Compressor Maintenance
140
Operator Manual Screw Compressor
M100
No.: 9_6999 23 USE