background image

Fig. 55 Draining the engine oil ................................................................................................................ 121

Fig. 56 Draining the engine oil (closed floor pan - stationary machine) ................................................. 122

Fig. 57 Changing the oil filter .................................................................................................................. 123

Fig. 58 Belt guard attachment ................................................................................................................ 124

Fig. 59 Checking the drive belt seating .................................................................................................. 125

Fig. 60 Manually checking the belt tension ............................................................................................ 125

Fig. 61 Changing/tensioning the drive belt ............................................................................................. 126

Fig. 62 Safety signs - warning stickers on the battery. ........................................................................... 127

Fig. 63 Checking cooling oil level ........................................................................................................... 131

Fig. 64 Draining the compressor cooling oil ........................................................................................... 134

Fig. 65 Draining the oil from the heat exchanger ................................................................................... 135

Fig. 66 Draining the cooling oil (closed floor pan - stationary machine) ................................................. 136

Fig. 67 Changing the oil filter .................................................................................................................. 137

Fig. 68 Oil separator tank dirt trap maintenance .................................................................................... 138

Fig. 69 Changing the oil separator cartridge .......................................................................................... 140

Fig. 70 Changing the oil separator cartridge (Option ba) ....................................................................... 142

Fig. 71 Compressor air filter maintenance ............................................................................................. 144

Fig. 72 Cleaning the filter element .......................................................................................................... 145

Fig. 73 Cleaning the compressor cooler and engine radiator ................................................................. 147

Fig. 74 Cleaning the compressed air aftercooler .................................................................................... 148

Fig. 75 Towbar maintenance .................................................................................................................. 150

Fig. 76 Maintaining the fixed height towbar ............................................................................................ 150

Fig. 77 Ball coupling (EC version) .......................................................................................................... 151

Fig. 78 Ball coupling (USA version) ........................................................................................................ 152

Fig. 79 Checking the brake lining thickness ........................................................................................... 153

Fig. 80 Brake system adjustment ........................................................................................................... 153

Fig. 81 Brake rod adjustment ................................................................................................................. 154

Fig. 82 Tool lubricator maintenance ....................................................................................................... 156

Fig. 83 Cleaning the dirt trap .................................................................................................................. 157

Fig. 84 Filter combination ....................................................................................................................... 159

Fig. 85 Combination filter maintenance .................................................................................................. 159

Fig. 86 Fresh air filter maintenance ........................................................................................................ 162

Fig. 87 Filling the frost protector ............................................................................................................. 165

Fig. 88 Cleaning the spark arrestor (floor pan with service openings) ................................................... 166

Fig. 89 Cleaning the spark arrestor (sealed floor pan) ........................................................................... 167

Fig. 90 Engine air intake shut-off valve maintenance ............................................................................. 168

Fig. 91 Securing the belt guard at the generator .................................................................................... 170

Fig. 92 Generator belt tensioning ........................................................................................................... 171

Fig. 93 Towing position .......................................................................................................................... 231

Fig. 94 Ball coupling (ALKO-EU) ............................................................................................................ 232

Fig. 95 Wear alert, ball coupling (ALKO-EU) .......................................................................................... 233

Fig. 96 Ball coupling (ALKO-USA) ......................................................................................................... 234

Fig. 97 Release the parking brake. ........................................................................................................ 234

Fig. 98 Automatic jockey wheel in transport position ............................................................................. 235

Fig. 99 Safety sign - secure the chocks ................................................................................................. 236

Fig. 100 Breakaway cable attachment ..................................................................................................... 237

Fig. 101  ................................................................................................................................................... 237

Fig. 102 Warning "Injury can occur if the towbar is allowed to fall." ......................................................... 238

Fig. 103 Towbar with automatic jockey wheel .......................................................................................... 239

Fig. 104 Actuating the parking brake ........................................................................................................ 239

Fig. 105 Safety sign - secure the chocks ................................................................................................. 240

Fig. 106 Transporting using a forklift truck ............................................................................................... 242

Fig. 107 Guys to secure the freight .......................................................................................................... 243

Fig. 108 Identification ............................................................................................................................... 245

List of Illustrations

viii

Operator Manual    Screw Compressor   
M100  

No.: 9_6999 23  USE

Summary of Contents for M100

































































































































































































































































































































































































Reviews: