CAUTION
Danger of burns from hot components and escaping engine oil!
➤ Wear long-sleeved clothing and gloves.
Fig. 28 Changing the engine oil
1
Oil filler cap
2
Oil filter
3
Oil dipstick
4
Engine block
5
Oil pan
6
Oil drain plug
Draining the engine oil:
1. Place the oil receptacle below the corresponding drain hole in the floor pan.
2. Unscrew and remove the oil filler cap
1
.
3. Undo and remove the oil drain plug
6
.
All the old oil must be drained out.
4. Replace the drain plug with a new gasket and tighten.
Dispose of old oil and oil-soaked working materials according to environmental protection
regulations.
Further information See engine service manual for oil change under dusty conditions.
Filling with engine oil
1. Pour in the specified volume of fresh oil into the oil filler.
2. Screw on the filler cap
1
.
Checking the engine oil level
It takes a few minutes for oil to reach the sump.
Wait 5 minutes then use the dip stick
3
to check the oil level.
The level must be between marks A and B.
10 Maintenance
10.3 Engine
82
Service Manual Screw Compressor
M43
No.: 9_9432 02 E
RAMIRENT
All manuals and user guides at all-guides.com