Long-term decommissioning tasks
See chapter Confirmed?
➤ Hang a notice on the instrument panel informing of the decommis‐
sioning measurements taken.
–
Engine SM = engine manufacturer's service manual.
Tab. 65 Long-term decommissioning checklist
➤ Hang the following notice on the instrument panel informing of the decommissioning measure‐
ments taken.
Attention!
1. The machine is decommissioned.
2. It is filled with preserving oil.
3. For recommissioning -
■ take measures for recommissioning after a long period of storage.
■ Recommission according to service manual.
Date / signature
Tab. 66 "Long-term decommissioned" information notice
➤ Store in a dry place with even temperature.
12.2 Transporting
Precondition Machine switched off and locked off.
The machine is cooled down and completely depressurised (pressure gauge reads 0 bar).
All connecting lines and hoses disconnected and removed.
Any loose or movable parts that may fall when transporting, removed or secured.
Allow transportation only by personnel trained in safely dealing with motor vehicles and the trans‐
porting of goods.
1. WARNING!
There is danger of being run over or crushed by an overturning vehicle.
Death or serious injury can result from being crushed or run-over by a machine under tow.
➤ Riding on the machine while it is under tow is strictly forbidden.
2. Make sure the danger area is clear of personnel.
12.2.1 Towing the compressor on the road
The machine is not only a means of generating compressed air but must also be considered as a
trailer.
■ Machines with appropriate chassis versions and running gear are approved for towing on pub‐
lic roads.
■ The machine is designed for a maximum towing speed of 100 km/h.
■ National and local regulations must be observed when towing the machine on public highways.
12 Decommissioning, Storage and Transport
12.2 Transporting
194
Service Manual Screw Compressor
M43
No.: 9_9432 02 E
RAMIRENT
All manuals and user guides at all-guides.com